Ground Anchors TX

Ground Anchors TX

Construction Projects: The Role Of Ground Anchors In TX

In geotechnical construction, ground anchors are most commonly used to support structures. Basically, this is done to transfer applied tensile load into the ground simply by installing a structural element in soil. Also known as earth anchor, these devices may either be run in spirally or be impact driven into the ground, depending on their design and intended force-resistance features. Ground anchors in TX are employed in both permanent and temporary applications including supporting circus tents, guyed masts, and retaining walls.

Typical applications of ground anchors

The fundamental concept of supporting structures with ground anchors in TX involves fortification of structures through driving in of anchors to the ground, in order to provide additional stability to cantilevered retaining walls thereby boosting the overall strength of the reinforcement and to limit collapse. With one end of the device secured to the wall while the other end is anchored into earth or driven into the grown with sufficient resistance.

In Texas, ground anchors are typically being used in construction projects and civil engineering. A ground-anchored structure can be constructed to resist forces that would otherwise cause the wall to lean. However, it is good to know that this form of active in-situ soil reinforcement technique has a variety of applications. As a matter of fact, they can be used for:

    Sporting activities, such as abseiling or slacklining General security such as anchoring small aircraft Anchoring semi-mature transplants, trees and for landscape work Restraining and load-locking in drainage systems Anchoring utility poles and similar structures Supporting radio transmission towers and other types of guyed masts Tethering pipelines, floating docks, and other marine structures Providing temporary structures and buildings with structural support such as outdoor stages and circus tents Controlling erosion with retaining walls

Design considerations

There is the need for sufficient for a greater length or additional ground anchors if the load applied is of higher range. But when the loads applied are small, a lesser depth can be established. Some components of the ground anchor include grout body, spacer, strands, wedge, bearing plate, individual sheathing, and wedge plate.

As you already know, ground anchors in TX can either be sent into the ground in a screw fashion or by impact. These supportive devices can be used for both small and large applications to provide protection in several ways, such as resisting uplift action that could occur due to a rise in water table, rendering vertical excavation support, protecting against slope-stability failures and lots more.

In a bid to provide more force-resistances, ground anchors are usually been supported by a large frustum of the cone of soil particularly when installed to a greater depth. One important shear strength parameter of the soil that should also be taken into consideration is the angle of internal friction. This feature plays a crucial role in the resistance of the load supported by the ground anchor.

When it comes to transmitting the anchor load closer to the ends of the bearing plate’s span, it’s also very important to consider the stiffness of the wedge plate.


Ground Anchors Tx
Oscar Orduno, Inc.
4600 Fuller Dr, Suite 375, Irving, TX 75038

View Larger Map
WordPress Appliance - Powered by TurnKey Linux